Sierra/Kramer 8x8 RGB - YUV - HD Digital/Analog VIDEO 2CH Audio MATRIX SWITCHER

Description

Sierra Video - Kramer 88V3HDES NLE 8x8 RGB/YUV+ HD Video Unbalanced/Balanced  Digital Audio Stereo Audio Matrix Switch
Non-linear editing facilities often need to route a variety of signal formats into and out of there editing system. The Sierra NLE™ multi-level,
multi-format routing/switcher offers that level of flexibility and much more. Designed specifically for small to mid-sized non-linear editing
facilities routing multiple formats, the 8x8   NLE switcher can be configured to include HD-SDI/SDI multi-rate video, SDI-only video, AES/EBU digital
audio, analog video and/ or Y/C, RGB/YUV, and analog stereo audio.
Features: •Matrix Mapping Universal Breakaway™ Switching for multi-format use •Adjustable audio gain and attenuation with no zipper effect   t •Room
grouping of inputs for flexible configuration in multi room applications •Front panel control Interface with LCD display •IP and RS-232 control•
Full range of remote control panels available Matrix Mapping Universal Breakaway™ Switching :The Sierra NLE switcher is designed to allow each level
of a single input or output to be used independently for various formats. This Sierra NLE switcher is fully configured with all 7 levels installed, a
user can connect some combination of up to three video signals (analog video which takes up one level, s-Video (YC) which takes up two levels,
component video (YUV) or RGB video, both of which take up three levels) to the video levels of any input. They can also simultaneously connect an SDI
video signal, an AES/EBU digital audio signal and either a balanced stereo audio signal or two mono audio signals to the same input. In the Sierra
NLE routing switcher, each level of an input can be switched independently or in conjunction with any combination of the other levels on that input
to the corresponding level of any combination of the outputs. That is multi-format, multi-level switching.
Performance Specifications: Analog Video Gain: Unity Crosstalk: -80dB @ 1MHz, -47dB @ 100MHz, -30dB @ 150MHzSwitching: Speed Deterministic Input
Video Level: 0.2V to 5V p-p Impedance: 75 Ohm Return Loss: < -30dB @ 5MHzConnector Type: BNC Output Video Level: 0.2V to 5V p-p Impedance: 75 Ohm
Return Loss: < -30dB @ 5MHzConnector Type: BNCSDI Video Data Rates: 19 – 360Mbps Data Types: SMPTE 310M, SMPTE 259M, DVB-ASI, ITU-R BT.601
Input Video Level: 800mV p-p +/-10% Impedance: 75 Ohm Return Loss: > 15dB Cable Equalization Range: 0-300 meters, Belden 8281Connector Type: BNC
Output Video Level: 800mV p-p +/-10% Impedance: 75 Ohm Return Loss: > 15dB Rise/Fall Times: 400 – 1500 p sec Connector Type: BNC AES/EBU AUDIO Data
Rates: 32KHz - 96KHz Jitter: <0.025 UI p-p Maximum Distance: 100 m Cable: STP Input Type: Balanced Return Loss: 30 dB @ 6 MHz Minimum Input: 200mV
p-p Connector Type: Terminal block Output Type: Balanced Audio Level: 3.5V nominal Return Loss: 30 dB @ 6 MHz Connector Type: Terminal block
Analog Audio Output Adjust Range: +15dB to -59.5dB and fully off (MUTE )Frequency Response: 20Hz to 20KHz +/- 0.5dB (typical -3dB @ 120KHz) (unity
gain) Dynamic Range: 96dB (20-20KHz unweighted) (unity gain) Crosstalk: < -80dB @ 1KHz (unity gain), < -60dB @ 10KHz (unity gain)THD: < 0.025% (20Hz
– 20KHz @ +4dBu) (unity gain)IM: < 0.025 SMPTE-DIN @ +4dBu (unity gain), <0.01% CCIF @ +16dBu (unity gain)Input Maximum Source Level:
+24dBuImpedance: > 20KConnector Type: 5 pin terminal block for balanced or unbalanced operation Output Maximum Source Level: +24dBu balanced, +18dBu
unbalanced Impedance: < 50 Ohm Connector Type: 5 pin terminal block for balanced or unbalanced operation. Unit tested, as much as possible and is working. Not all combinations can be tested do to the multiple combinations of audio/video achievable.
NO software, manual or cables included, will come with line cord only.